FORMING STATION CAN BE USED AS FORMING/CUTTING STATION

Mould available

Forming Area

• Max. forming area: 825 × 675 mm
• Min. forming area: 375 × 350 mm
• Max. tool dimensions: 850 × 700 mm
• Tool dimensions max. (block change): 850 × 700 mm
• Height of formed part above / below film level / total: 150 / 150 mm
• Max. film width (parallel rails): 900 mm
• Film thickness range (depending on film properties): 0.2 – 1.8 mm
• Max. production speed (depending on stacking system): 45 cycles/min
• Max. production speed BFS (depending on stacking system): 40 cycles/min

Heating System

• Heating capacity per heater bank: 67.2 / 67.2 kW
• Heating elements (ceramics, black – HTS): 125 × 125 mm
• Heating element layout (longitudinal row × cross row): 6 × 14

Forming Station

• Forming station force: 420 kN
• Forming cutting force (BFS): 800 kN
• Max. tool weight top/bottom table: 750 / 750 kg
• Max. tool BFS weight top/bottom table: 750 / 750 kg
• Max. tool block weight: 1500 kg
• Top/bottom table movement: 170 mm

Hole Punching Station

• Hole punching station force: 420 kN
• Max. tool weight top/bottom table: 750 / 750 kg
• Max. tool block weight: 1500 kg
• Top/bottom table movement: 170 mm

Cutting Station

• Cutting station force: 800 kN
• Max. tool weight top/bottom table: 750 / 750 kg
• Max. tool block weight: 1500 kg
• Max. tool weight knife plate: 150 kg
• Top/bottom table movement: 170 mm
• Downstacker: –
• P&P Inline: –
• P&P: 420 mm

Pusher Weight

• Up-stacker: 80 kg
• Tip-stacker: 40 kg
• Downstacker: –
• P&P Inline: –
• P&P: 80 kg

Stacking station – Max. Speed

• Up-stacker: 45 cycles/min
• Tip-stacker: 45 cycles/min
• Downstacker: –
• P&P Inline: –
• P&P: 50 (D-Basket)

Vacuum System

• Operation pressure: 6 bar
• Vacuum pump: 300 m³/h / 2× 1½” / 2× 1″
• Vacuum connection tool: –
• Forming air vessel: 2× 90L / 2× 2″
• Forming air connection tool: 4 × 1″ max. coupling
• Cooling water circuits: 2 × 6 × 1/2″

Electrical Data

• Voltage: 3 × 400V AC + N + PE (50/60 Hz)